£239.94

{Description}
25 mbps Ethernet LAN Extender Link kit, a pair of NVF-200 units providing up to (50 Mbps) symmetrical bandwidth over single twisted pair copper. Now with speed select switched
Extends Ethernet connections over the 100m distance limit up to 1.9Km.
Reduce costs by not having to run Cat5 cables for Ethernet where telephone cables exist, also runs telephone at ame time as Ethernet over the same pair of wires
{key features}
• Support auto speed and 25/15/5M fix mode selectable through DIP switch
• Supports 1 * RJ-11 connector for Ethernet over VDSL
• Supports 1 * RJ-11 connector for telephone/PBX connection
• Supports 1 * RJ-45 port for 10/100Mbps Ethernet with Auto MDI/MDIX
• Supports 1* DIP Switch for speed selectable(NVF-200LS only)
• Supports long packet size up to 1536 bytes
• Supports POTS/ISDN voice pass
• Supports 4wires phone set pass through
• Voice and Data work on the same telephone line
• Spectral compatibility with xDSL, ISDN (2B1Q/4B3T)
• Flow control IEEE802.3x for Full Duplex / Back Pressure for Half Duplex
• Supports Surge protection
• Provides Power LED and LED indication Link/Active Status for Ethernet
port and Link/Speed for VDSL port
• Plug & Play, mini size and metal case for outdoor application
{reseller notes}
We see these units used to connect building, I/P video camera and the remote PC or control device

If you also need power over the same pair of copper wires look at the NVF0200SE units
{Speed and Distance}

Max distance /Speed
5M/5M distance up to 1.9km(6333ft),

15M/15M distance up to 1.3km(4333ft),

Max speed 25M symmetrical and distances up to 800m(2666ft)
{Standards}
• Compliant with IEEE802.3 10BASE-T and IEEE802.3u 100BASE-TX standard
• Compliant with ETSI, ITU, ANSI standards
• EMI certified by CE, FCC Class B, and VCCI Class B
• Safety compliant EN60950-1
find out more

£418.80

Now you can power remote POE devices using only one pair of coper wires will using the same wires to extend Ethernet to 1.Km using the NVF-200SE and NVF-200PD
{Overview} NVF-200SE system delivers power and IP connectivity at distances up to 1000m (3,280feet)
using existing or new copper UTP wire. Innovative transmission techniques result in power
feeding and data over a single pair phone wire and are ideal for deploying extended Ethernet
where there are no or limited electricity at one end, this will ensure reliable delivery of essential
power and data to and from remote locations. Operators in various enterprises will now be able
to deploy PoE devices in any service location, install network security cameras, wireless access
point security / VOIP, or access control systems in any place where you have basic wire
connectivity.

The NVF-200SE and NVF-200PD provide extended-length power and Ethernet connections
over single pair of UTP copper wire: Cat. 5 or greater. The NVF-200SE/PD works as Ethernet
to/from VDSL subscriber-site conversion bridge. The NVF-200SE/PD uses VDSL technologies,
which supports 5M/ 15/ 25Mbps per port symmetrical bandwidth over phone wiring with long
driver capable of a maximum 1000m (3,280 feet).
{Features} Supports 10/100M auto MDI/MDIX Ethernet port
• Supports 5/15/25Mbps fixed/auto speed VDSL ports
• Supports flow control
• Supports long packet up to 1536 byte
• Maximize network uptime and centralize power for all remote devices.
• Support VDSL and Ethernet surge protection
• Connect to standard IEEE 802.3af Ethernet PD; class 0, 1, 2, or 3.
• Remove the 100m-distance limitation of Ethernet – for both PoE power and data.
• Combine data and power over single pair of twisted phone cable.
• Easily add/move/change to any location over existing or newly pulled wires
• Configure speed using the DIP switch.
• Reduce engineering time and eliminate requirements for new power sources
for remote Ethernet devices.
{Spec's} Interface: 1 x RJ-45 for single pair VDSL line port
1 x Terminal block for VDSL line port

1 x DIP switch for line speed setting (NVF-200SE only)

2 x power jack for 48V power adapter (NVF-200SE only)
1 x RJ-45 for fast Ethernet port with power injector (NVF-200PD only)
Power Protection: OVP(Over Voltage Protection)
OCP(Over Current Protection)
OTP(Over Temperature Protection)
Robust short circuit protection
Power/Remote power for system
Link/Active for Ethernet port
Standard Compliant: IEEE802.3; IEEE802.3u; IEEE802.3af; ITU-G993.1
EMC Compliant: CE, FCC, VCCI
Safety Compliant: EN60950
Environmental: RoHS
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Humidity: 10 to 90% (non-condensing)
Dimensions: NVF-200SE: 146mm x 97mm x 33mm
NVF-200PD: 169mm x 106mm x 33mm



find out more