The Netsys NM-1000 is a converter that translates transmission signals from a twisted-pair
1000BASE-TX cable(UTP) to 1000BASE-FX fiber optic cable. The converter automatically adapts to the highest level of performance supported by the device connected to the Ethernet port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 2000Mbps bandwidth. When the device connected is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 1000Mbps bandwidth.
NM-1000 supports conversion between 10/100/1000Base-T and 1000Base-LX / SX network, which are SC / SFP / WDM connectors with single-mode or multi-mode media as required.
With high performance of data transmission and easy installation, the NM-1000 can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building), also for small office network environment of enterprises.

• Supports auto-MDIX and 10/100/1000Base T for RJ-45 port
• Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE
802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX / LX
• Supports all of standard SFP Transceiver Connecting as Multi Mode/ Single Mode/ WDM
• Data Transfer Rate: 1000Mbps
• Duplex mode support: Full or half-duplex mode by Auto-Negotiation.
• Store-and-forward mechanism
• Compact in size, easy installation
• EMI certified by CE, FCC
• RoHS compliant

Protocol and Standards: IEEE802.3, IEEE802.3u, IEEE802.3ab,IEEE802.3z Standard
Maximum Speed: Full Duplex: 2000Mbps for 1000Base-Tx/Fx
Half Duplex: 1000Mbps for 1000Base-Tx/Fx
Cabling: Ethernet: 1000Base-Tx 2 pair Cate.5 UTP Cable
Fiber Optic: Flexible (Depending on Fiber Transceiver)
Modes: Full or Half-duplex mode, Auto-Negotiation
Packet Forwarding Rate(64Bytes): 14880pps@10Mbps / 148800pps@100Mbps /
1488000pps@1000Mbps
Connector: Copper: RJ-45(Auto-MDI / MDI-X)
Fiber Optic: SFP Type
TX/RX Optical Frequency: Flexible (Depending on Fiber Transceiver)
LED Indication: PWR
TX: LINK/ACT, SPD, FD/COL
FX: LINK/ACT, SPD, FD/COL
Operating Temperature: 0°C ~ 50°C(32°F ~ 122°F)
Storage Temperature: -20°C ~ 65°C(-4°F ~ 149°F)
Humidity: 10 to 90% (non-condensing)
Dimension: 108 x 80 x 26 mm
External Power Adapter: Input: AC 100-240 volts/ 50-60Hz
Output: DC 12V/1A
Typical Power Consumption: 4.8W