The VDSL solution delivers everything needed to quickly deploy an Ethernet-based network with the performance required to deliver high-speed Internet access at much greater distances and drive services like IP telephony and audio/video streaming. With this technology, a broad range of customers can benefit from lower operating costs and rapid deployment. NV-200LC solution provides a RJ-45 console port for monitor VDSL status and configure speed.
The Converter is simple to install and use. One RJ-45 Ethernet connects to a Router, Ethernet Switch or to LAN card. The RJ11 ports available to connect to any existing modular phone jack. There are two RJ-11 jack on the Converter to provide a phone extensions.
No software installation makes the converter highly compatible with different operating system ( Windows, Linux, Apple.....etc)

Key Features & Benefits
Please contact to our sales Rep.if there is any request in detail for the specification.
Compliant with IEEE 802.3 & 802.3u Ethernet Standards.
Compliant with ETSI, ITU, ANSI VDSL standards.
Provides 1 x 10/100M auto-sensing RJ-45 Ethernet ports.
Provides 1 x POTS/ISDN RJ-11 splitter on board.
Provides 1 x4/1, 5/10/15 Mbps VDSL RJ-11 port.
Provides one RJ-45 console port
Spectral compatibility with xDSL, ISDN (2B1Q/4B3T).
Supports Utility software for bandwidth setup, link/traffic/SNR
..............etc. Monitor
Symmetric and asymmetric data transmission on the same line.
Supports flow control IEEE802.3x for Full Duplex & Back Pressure
for Half Duplex.
Long driver capable up to 1.9Km(4/1/Mbps)1.5Km (5Mbps)/1.2Km(10M)/
1Km(15M)
Surge protection.
Provides Ready LED.
Provides LED indication Link/Active Status for Ethernet port and Link
for VDSL port.
External switching power adapter Input: AC 85-240 volts/50-60Hz;
Output: DC 5V/1A or above.
Dimensions: 95 x 110 x 24 mm.
Operating Temperature : 0°C~ 50°C(32F ~ 122F).
Humidity: 10%~90% non-condensing.
EMI by FCC/CE
Safety by EN60950