NV-600 is a fully featured VDSL2 system using the latest Infineon chip sets and support the full range of band profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a and 997,998 band plans unlike many of our competitors products and can be configured as a simple bridge or a fully function router.
(see key features)
This Symmetric 100Mbps LAN extender kit will allow you to deploy a 100mbps Ethernet connection over a single pair or copper wires, an existing analogue phone line or an Ethernet cable that's to long
The Kit consisting of a pair of VDSL2 units (NV-600L master and NV-600R remote) providing all you need to provide or extend your 100 Mbps Cat5 LAN connection 300M and more using 1 pair of wires (telephone or copper twisted pair)
NV-600 units are ITU-T G.993.2 full spec VDSL2 and compatible to the latest and most advanced standard of DSL broadband wire line communications.
These units provide up to 100Mbps symmetrical (200Mbps) aggregate bandwidth at distances exceeding 1,000 feet (300m) designed to support the wide deployment of Triple Play services such as
voice, video, data, high definition television (HDTV) and interactive gaming, VDSL2 enables
operators and carriers to gradually, flexibly, and cost efficiently upgrade existing xDSL-infrastructure.
Contact us for more information and applications that would benefit form VDSL2

Solution also features the ability to combine telephone (POTS/ISDN/PBX) service over the same 2 wires and features built-in POTS/ISDN splitters to eliminate external splitter devices

• Compliant with IEEE 802.3 & 802.3u Ethernet Standards
• Compliant with G993.2 VDSL2 standards
• Provides 4 x 10/100M auto-negotiation RJ-45 Ethernet ports
• Supports Bandwidth setup with 100 Mbps VDSL RJ-11 ports
• POTS / ISDN Splitter port RJ-11 x 1 (Splitter on board)
• Supports auto speed for VDSL2 port
• Supports Web management(HTTP), TFTP, Console(RS232)
• Supports uPnP/PPPoE/NAT/DHCP/DMZ/Firewall
• Supports Route & Switch(Bridge) mode
• Supports Loop back
• Supports SNR indicator for check phone wiring quality
• Supports Interleave delay for Data Error & Noise Against
• Support 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a band profile
• Support 997,998 band plan
• Provides surge protection for VDSL2 port
• EMI Compliant: CE, FCC, VCCI

Standard: IEEE802.3 standard
IEEE802.3u standard
Compliant G993.2 VDSL2 standard
Interface: 4 * RJ-45 10/100Mbps Ethernet port
1 * RJ-11 connector for VDSL2
1 * RJ-11 connector for POTS/ISDN device
Band Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a
Band Plan: 997, 998
Max. Bandwidth: Symmetric 100 Mbps / 0.3 Km
LED indication: Power LED
Link/Active Status for Ethernet port * 4
Link LED for VDSL port
Switch method: Store and forward
Console port: RS-232C/115200bps
Flow control: Full duplex: IEEE 802.3x
Half duplex: Back pressure
Typical Power Consumption: 5.52W
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature: -20°C ~ 65°C (-4°F ~ 149°F)
Humidity: 10 to 90% (non-condensing)
Dimensions: 184 x 146 x 40 mm (7.2" x 5.74" x 1.57")
Chipsets: Infineon MIPS ADM5120P
Infineon VINAX

Resellers and for project pricing contact us

additional information and longer cable runs data speak to us
Units are pre configured in bridge mode and tested before shipment
Just plug in and they will usually work upto 600m with no need to change any configurations

Netsys Ethernet HyperXtender GT Kit (NV-600EKIT) the version Sold in the USA
Point-to-point Ethernet Extension applications, providing bandwidth of up to 100Mbps symmetrical (200Mbps aggregate bandwidth) at distances exceeding 1,000 feet (300 m) and a maximum distance of over 4,200 feet (1,280 m) at asymmetrical speeds exceeding 3 Mbps Upstream and 30 Mbps
we usually get between 50 and 80 Mbps @ 600m Downstream over one twisted-pair of network grade cable. Telephone grade twisted-pair cable can be used, however, speed and distance will vary based the actual cable used, quality of line, and the environment. The NV-600EKIT includes an NV-600RE Remote Unit and NV-600LE Local Unit that feature four auto-sensing RJ-45 Ethernet Ports, full-featured Router functionality, and management via Web Browser (HTTP).
We can also supply specific cables to make your installation quicker