The NVF-200 Kit, uses a single copper pair or the existing building phone line networking to provide and Extend Ethernet connections. The VDSL 4 band technology used in the Netsys NVF-200 products is built to an agreed standard and is endorsed by industry-leading companies for inter -networking on the existing telephone wire.
NVF units can deliver up to 25Mbps of bandwidth for Internet access or LAN extension with no interference on the existing telephone service.
It allows user to make calls while access the internet on the same wire simultaneously. It even allows staying connected 24 hours on internet connections, thus, eliminating dial up prior to internet access.
The LAN Extender Kit is simple to install and use. One RJ-45 Ethernet connects to a Router, Ethernet Switch or to LAN card. The RJ11 ports available to connect to any existing modular phone jack. There are two RJ-11 jack on the Converter to provide a analogue phone extensions.
No software installation makes the converter highly compatible with different operating system ( Windows, Linux, Apple.....etc) and the units will auto sync to obtain the optimum speed on the link.

An ideal solution for
- Cat5 link over 100m that do not work
- Getting Ethernet to out building, especially if there is already a phone there
- Placing wireless access points using just a pair of copper wires
- Getting Ethernet services into old building
- Providing Ethernet where wireless is unacceptable or will not function or not secure enough

Key Features & Benefits
Please contact to our sales Rep.if there is any request in detail for the specification.
Compliant with IEEE 802.3 & 802.3u Ethernet Standards.
Compliant with ETSI, ITU, ANSI VDSL standards.
Provides 1 x 10/100M auto-sensing RJ-45 Ethernet ports.
Provides 1 x VDSL RJ-11 port.
Provides 1 x POTS / ISDN RJ-11 splitter on board.
Spectral compatibility with xDSL, ISDN (2B1Q/4B3T).
Robust operation on severely distorted line.
Symmetric and asymmetric data transmission on the same line.
Supports flow control IEEE802.3x for Full Duplex & Back Pressure
for Half Duplex.
Long driver capable up to 1.9Km(5Mbps)
/1.3Km(15M)/0.8Km(25M).
Surge protection.
Provides Ready LED.
Provides LED indication Link/Active Status for Ethernet port and
Link for VDSL port.
External switching power adapter Input: AC 85-240 volts/50-60Hz;
Output: DC 5V/1A or above.
Dimensions: 95 x 110 x 24 mm.
Operating Temperature : 0°C~50°C(32F ~ 122F).
Humidity: 10%~90% non-condensing.
EMI by FCC/CE
Safety by EN60950