The NP-100SE is a Power-over-Ethernet (PoE) power supply DC Injector (350mw output). It provides DC power for one PoE-equipped device by "Injecting" DC power through the CAT5 ethernet cable. Includes extenal DC PSU and UK IEC320 power cord. (Use with NP100 adaptors to power non POE devices)
General Description
The Netsys Power over Ethernet (PoE) Adapter. It delivers data and electrical power to access points using
standard Category 5 Ethernet cable. This eliminates the need for electrical cable and power converters at each
access point location.
The Power over Ethernet (PoE) Adapter is easy to install. It 's Plug n Play and requires no tools or software.
Best of all, the PoE is light weight and compact size means you can locate it virtually anywhere and never know
it 's there. The PoE transfers data on Category 5 Ethernet cable pairs 1/2 and 3/6. Power is transmitted on
unused Ethernet pairs 4/5 and 7/8. It has an operational range of up to 328 ft./100m, which is a requirement of
the Fast Ethernet standard.
Terminal Unit With the PoE you can mount devices such as an access point virtually anywhere in a building
without worrying about the location of a power supply.

Complies with IEEE802.3af, Power over Ethernet, IEEE802.3/802.3u 10/100Base-TX.
Provides 48V DC power over RJ-45 Ethernet cable to device with Ethernet port.
LED indicators power input indication.
Distance up to 100 meters with RJ45 Ethernet cable.
Auto-detect of PoE 802.3af equipment, protect devices from being damaged by incorrect installation.

Input Specification
Data Interface: RJ-45 Jack.
Input Signal IEEE 802.3af compliant signal from PSE.
Input Voltage 36 ~ 57 Vdc( 48V).
Input Current 400mA MAX.
Input: @Vin=48 Vdc.
Output Specification
PD Detection & Classification: IEEE802.3af compliant.
PoE Interface: RJ-45 Jack.
Output Voltage: 48V±10%.
Output Current: 350mA MAX.
Output Power: 15.4W MAX.
LED Display: PoE Not Active ( Orange ) / PoE Active ( Green ).
General Specification
Dimensions: W66 x L56.4 x H25 mm(2.6" x 2.2" x 0.98").
Operating Temperature: -10°C ~ +60°C.
Storage Temperature: -20°C ~ +70°C.
Humidity: Up to 90% (non-condensing).
Cooling: Free air convection.