£305.44

{overview} NV-600 is a fully featured VDSL2 system using the latest Infineon chip sets and support the full range of band profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a and 997,998 band plans unlike many of our competitors products and can be configured as a simple bridge or a fully function router.
(see key features)
This Symmetric 100Mbps LAN extender kit will allow you to deploy a 100mbps Ethernet connection over a single pair or copper wires, an existing analogue phone line or an Ethernet cable that's to long
The Kit consisting of a pair of VDSL2 units (NV-600L master and NV-600R remote) providing all you need to provide or extend your 100 Mbps Cat5 LAN connection 300M and more using 1 pair of wires (telephone or copper twisted pair)
NV-600 units are ITU-T G.993.2 full spec VDSL2 and compatible to the latest and most advanced standard of DSL broadband wire line communications.
These units provide up to 100Mbps symmetrical (200Mbps) aggregate bandwidth at distances exceeding 1,000 feet (300m) designed to support the wide deployment of Triple Play services such as
voice, video, data, high definition television (HDTV) and interactive gaming, VDSL2 enables
operators and carriers to gradually, flexibly, and cost efficiently upgrade existing xDSL-infrastructure.
Contact us for more information and applications that would benefit form VDSL2

Solution also features the ability to combine telephone (POTS/ISDN/PBX) service over the same 2 wires and features built-in POTS/ISDN splitters to eliminate external splitter devices
{key features}
• Compliant with IEEE 802.3 & 802.3u Ethernet Standards
• Compliant with G993.2 VDSL2 standards
• Provides 4 x 10/100M auto-negotiation RJ-45 Ethernet ports
• Supports Bandwidth setup with 100 Mbps VDSL RJ-11 ports
• POTS / ISDN Splitter port RJ-11 x 1 (Splitter on board)
• Supports auto speed for VDSL2 port
• Supports Web management(HTTP), TFTP, Console(RS232)
• Supports uPnP/PPPoE/NAT/DHCP/DMZ/Firewall
• Supports Route & Switch(Bridge) mode
• Supports Loop back
• Supports SNR indicator for check phone wiring quality
• Supports Interleave delay for Data Error & Noise Against
• Support 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a band profile
• Support 997,998 band plan
• Provides surge protection for VDSL2 port
• EMI Compliant: CE, FCC, VCCI
{product spec's}
Standard: IEEE802.3 standard
IEEE802.3u standard
Compliant G993.2 VDSL2 standard
Interface: 4 * RJ-45 10/100Mbps Ethernet port
1 * RJ-11 connector for VDSL2
1 * RJ-11 connector for POTS/ISDN device
Band Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a
Band Plan: 997, 998
Max. Bandwidth: Symmetric 100 Mbps / 0.3 Km
LED indication: Power LED
Link/Active Status for Ethernet port * 4
Link LED for VDSL port
Switch method: Store and forward
Console port: RS-232C/115200bps
Flow control: Full duplex: IEEE 802.3x
Half duplex: Back pressure
Typical Power Consumption: 5.52W
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature: -20°C ~ 65°C (-4°F ~ 149°F)
Humidity: 10 to 90% (non-condensing)
Dimensions: 184 x 146 x 40 mm (7.2" x 5.74" x 1.57")
Chipsets: Infineon MIPS ADM5120P
Infineon VINAX


{reseller notes}Resellers and for project pricing contact us

additional information and longer cable runs data speak to us
Units are pre configured in bridge mode and tested before shipment
Just plug in and they will usually work upto 600m with no need to change any configurations

Netsys Ethernet HyperXtender GT Kit (NV-600EKIT) the version Sold in the USA
Point-to-point Ethernet Extension applications, providing bandwidth of up to 100Mbps symmetrical (200Mbps aggregate bandwidth) at distances exceeding 1,000 feet (300 m) and a maximum distance of over 4,200 feet (1,280 m) at asymmetrical speeds exceeding 3 Mbps Upstream and 30 Mbps
we usually get between 50 and 80 Mbps @ 600m Downstream over one twisted-pair of network grade cable. Telephone grade twisted-pair cable can be used, however, speed and distance will vary based the actual cable used, quality of line, and the environment. The NV-600EKIT includes an NV-600RE Remote Unit and NV-600LE Local Unit that feature four auto-sensing RJ-45 Ethernet Ports, full-featured Router functionality, and management via Web Browser (HTTP).
We can also supply specific cables to make your installation quicker
{Data Sheet}


find out more

£229.13

A Pair of universial (single/Multimode) Single Strand Fibre Media Converter Kit (NM-102KIT) includes the NM-102A20 & NM-102B20 100Base-TX Copper to 100Base-FX Fiber Media Converters and provides a point-to-point Ethernet network extension up to 1.2 miles (2Km) using a single strand of Multimode Fibre or up to 12 miles (20Km) using a single strand of Single Mode Fibre.

find out more

£234.94

{Description}
25 mbps Ethernet LAN Extender Link kit, a pair of NVF-200 units providing up to (50 Mbps) symmetrical bandwidth over single twisted pair copper. Now with speed select switched
Extends Ethernet connections over the 100m distance limit up to 1.9Km.
Reduce costs by not having to run Cat5 cables for Ethernet where telephone cables exist, also runs telephone at ame time as Ethernet over the same pair of wires
{key features}
• Support auto speed and 25/15/5M fix mode selectable through DIP switch
• Supports 1 * RJ-11 connector for Ethernet over VDSL
• Supports 1 * RJ-11 connector for telephone/PBX connection
• Supports 1 * RJ-45 port for 10/100Mbps Ethernet with Auto MDI/MDIX
• Supports 1* DIP Switch for speed selectable(NVF-200LS only)
• Supports long packet size up to 1536 bytes
• Supports POTS/ISDN voice pass
• Supports 4wires phone set pass through
• Voice and Data work on the same telephone line
• Spectral compatibility with xDSL, ISDN (2B1Q/4B3T)
• Flow control IEEE802.3x for Full Duplex / Back Pressure for Half Duplex
• Supports Surge protection
• Provides Power LED and LED indication Link/Active Status for Ethernet
port and Link/Speed for VDSL port
• Plug & Play, mini size and metal case for outdoor application
{reseller notes}
We see these units used to connect building, I/P video camera and the remote PC or control device

If you also need power over the same pair of copper wires look at the NVF0200SE units
{Speed and Distance}

Max distance /Speed
5M/5M distance up to 1.9km(6333ft),

15M/15M distance up to 1.3km(4333ft),

Max speed 25M symmetrical and distances up to 800m(2666ft)
{Standards}
• Compliant with IEEE802.3 10BASE-T and IEEE802.3u 100BASE-TX standard
• Compliant with ETSI, ITU, ANSI standards
• EMI certified by CE, FCC Class B, and VCCI Class B
• Safety compliant EN60950-1
find out more

£88.13

{Overview}
Netsys' NH-310C is the latest technological innovation of HomePNA3.1 Ethernet Bridge over
coaxial cable. NH-310C is designed for home and office applications that leverage the two most
popular network connections for home use: 10/100Mbps Ethernet connection and coaxial cable
connection.
NH-310C is designed to be a cost effective home networking solution. With plug &
play, this simply eliminates the pain in modification and high infrastructure cost. With the data
transmission up to 200Mbps and distance up to 1220m (4000ft), it meets the growing demand
for high speed multimedia services. Most importantly, with point-to-point and point-to-multipoint
applications, it allows networking for any locations such as home, office, sports center, buildings,
apartments, hotels, resorts and other places that need a high bandwidth network
{Features}
Compliant with HomePNA3.1/HomePNA3.0 over Coaxial cable(HCNA)
specifications (ITU-T G.9954)
• Compliant with IEEE802.3 10Base-T and IEEE802.3u 100Base-Tx standards
• Compliant with IEEE802.3x flow control standard
• Provides 2 x 10/100M auto-negotiation RJ-45 Ethernet ports with auto MDI/MDIX
• Provides 2 x f-type female coax connectors for HCNA and TV
• Supports transmission speed up to 200Mbps over coaxial cable and distance
up to 1220m(4000ft) or -160dBm/Hz noise floor
• Supports point to point and point to multipoint application
• Supports IEEE802.1p priority mapping
• Supports IEEE802.1p/TOS priority queue
• Supports IEEE802.1Q Tag VLAN pass through
• Supports auto-speed from 4Mbps up to 200Mbps
• Guaranteed QoS based on HomePNA3.1 parameterized QoS
• EMI certified by CE and FCC

{Specifications}
Standards: IEEE802.3 standard
IEEE802.3u standard
Compliant ITU-T G.9954 standard
Interfaces: 2 x RJ-45 10/100Mbps Ethernet port
1 x f-type female coax connector for HCNA
1 x f-type female coax connector for STB/TV
1 x 5Vdc 1A DC jack
Max. Bandwidth: Up to 200Mbps
Max Distance: 1220m (4000ft) over RG-59 coaxial cable
Max. Noise Floor: -160dBm/Hz
LED Indicator: 1 x Power LED
1 x HCNA Link/Activity LED
1 x HCNA Line Speed LED
2 x Ethernet Link/Activity LED
SAT HCNA Transmission
Spectrum:
12MHz ~ 44MHz
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Humidity: 10 to 90% (non-condensing)
Dimensions: 130mm x 94.5mm x 27mm
(5.12" x 3.72" x 1.06”)
find out more

£88.13

{Overview}
Netsys' NH-310P is the latest technological innovation of HomePNA3.1 Ethernet Bridge over
phone cable. NH-310P is designed for home and office applications that leverage the two most
popular network connections for home use: 10/100Mbps Ethernet connection and Telephone
connection.
NH-310P is designed to be a cost effective home networking solution. With plug &
play, this simply eliminates the pain in modification and high infrastructure cost. With the data
transmission up to 140Mbps and distance up to 1220m (4000ft), it meets the growing demand
for high speed multimedia services. Most importantly, with point-to-point and point-to-multipoint
applications, it allows networking for any locations such as home, office, sports center, buildings,
apartments, hotels, resorts and other places that need a high bandwidth network
{Features}
Compliant with HomePNA3.1/HomePNA3.0 over phone cable
specifications (ITU-T G.9954)
• Compliant with IEEE802.3 10Base-T and IEEE802.3u 100Base-Tx standards
• Compliant with IEEE802.3x flow control standard
• Provides 2 x 10/100M auto-negotiation RJ-45 Ethernet ports with auto MDI/MDIX
• Provides 2 x RJ11 1 x Phone + 1 x HPNA line
• Supports transmission speed up to 200Mbps over coaxial cable and distance
up to 1220m(4000ft) or -160dBm/Hz noise floor
• Supports point to point and point to multipoint application
• Supports IEEE802.1p priority mapping
• Supports IEEE802.1p/TOS priority queue
• Supports IEEE802.1Q Tag VLAN pass through
• Supports auto-speed from 4Mbps up to 200Mbps
• Guaranteed QoS based on HomePNA3.1 parameterized QoS
• EMI certified by CE and FCC

{Specifications}
Standards: IEEE802.3 standard
IEEE802.3u standard
Compliant ITU-T G.9954 standard
Interfaces: 2 x RJ-45 10/100Mbps Ethernet port
1 x f-type female coax connector for HCNA
1 x f-type female coax connector for STB/TV
1 x 5Vdc 1A DC jack
Max. Bandwidth: Up to 200Mbps
Max Distance: 1220m (4000ft) over RG-59 coaxial cable
Max. Noise Floor: -160dBm/Hz
LED Indicator: 1 x Power LED
1 x HCNA Link/Activity LED
1 x HCNA Line Speed LED
2 x Ethernet Link/Activity LED
SAT HCNA Transmission
Spectrum:
12MHz ~ 44MHz
Operating Temperature: 0°C ~ 50°C (32°F ~ 122°F)
Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Humidity: 10 to 90% (non-condensing)
Dimensions: 130mm x 94.5mm x 27mm
(5.12" x 3.72" x 1.06”)
find out more